McAfee M-2750 - Network Security Platform Betriebsanweisung PDF herunterladen (Seite 7)

At any time during configuration, you can type a question mark (?) to get help on the Sensor

command-line interface (CLI) commands. For a list of all commands, type commands.

Log on to the Sensor using the terminal connected to the Console port.

At the prompt, log on using the default

Sensor user name (admin) and

password (admin123).

Optional, but recommended—Change the

Sensor password. At the prompt, type:

passwd.

The Sensor prompts you to enter the

new password and prompts you for the

old password.

A password must contain between 8 and 25 characters, is case-sensitive, and can

consist of any alphanumeric character or symbol.

Set the name of the Sensor:

You can enter the setup command at the prompt and this will automatically prompt

you to provide the necessary information or you can use the set command instead. If

you use the set command, you must manually enter the complete command syntax.

Example: At the prompt, type: set sensor name <word>.

Example: set sensor name HR_sensor1

The Sensor name is a case-sensitive character string up to 25 characters. The string

can include hyphens, underscores, and periods, and must begin with a letter.

If the Sensor is not on the same network as the Manager, set the address of the default

gateway. At the prompt, type: set sensor gateway <A.B.C.D>.

Example: set sensor gateway 192.168.3.68

Set the IP address of the Manager server. At the prompt, type: set manager ip <A.B.C.D>.

Example: set manager ip 192.168.2.8

Set the IP address and subnet mask of the Sensor. At the prompt, type: set sensor ip

<A.B.C.D> <E.F.G.H>.

Example: set sensor ip 192.168.2.12 255.255.255.0

Specify an IP address using four octets separated by periods: X.X.X.X, where X is a

number between 0 and 255, followed by a subnet mask in the same format.

If prompted, reboot the Sensor. Type: reboot.

The Sensor can take up to five minutes to complete its reboot.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

McAfee M-2750 - Network Security Platform Betriebsanweisung Seite 7