McAfee SG720 Installationsanleitung PDF herunterladen (Seite 22)

Manually configure LAN properties

1 Click Start | (Settings |) Control Panel, then double-click

Network Connections.

2 Right-click Local Area Connection (or appropriate network

connection), and select Properties.

3 Select Internet Protocol (TCP/IP), and click Properties.

Type the following:

• IP address – An IP address that is part of the same

subnet range as the UTM Firewall device LAN connection

(for example, if you are using the default settings,

192.168.0.2 - 192.168.0.254).

• Subnet mask – Subnet mask of the UTM Firewall device

LAN connection (if using the default settings,

255.255.255.0).

• Default gateway – IP address of the UTM Firewall device

LAN connection (if you are using the default settings,

192.168.0.1).

• Preferred DNS server – IP address of the UTM Firewall

device LAN connection (if you are using the default

settings, 192.168.0.1).

4 Click OK.

5 Repeat steps 1–4 for each computer on your network.

uf_SG720_qig_700-2240A00_en-us.fm Page 22 Monday, October 12, 2009 11:56 AM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Keine Kommentare

McAfee SG720 Installationsanleitung Seite 22